deleting a forked repo from github

 deleting a forked repo from github :

http://stackoverflow.com/questions/11302639/delete-forked-repo-from-github

By far the easiest way is to log in gitHub account:

1. Click to your repository {for example yourUsername/yourRepository for example igort/vuk}
2. Then in the main toolbar of github click on Settings
3. Scroll just a little bit down and you will find Delete this repository button
4. When you click it another pop up will appear here you need to type in the name of your repository and click on the button below which says: I understand the consequences, delete the repository

setting evince as default pdf viewer

setting default viewer for an application:

for example, you want to set "evince" as the default pdf viewer for any pdf document.

go to properties -> open-with -> select the program (evince in our case) -> set as default.

thats it, any time you open any pdf it will open using evince application :)


I think this should be applicable for all Linux distros, but I use fedora by default ;)

nfs server error

rpc.nfsd[4115]: rpc.nfsd: writing fd to kernel failed: errno 111 (Connection refused)

Are you getting the above error while starting nfs server?

well, you need to manually start rpcbind service...then start nfs server.

Canon IP2870 reset Ink level and orange light meaning

Canon ip2870

https://printerthinker.com/canon-pixma-ip2870/

This helps, So...
Canon IP2870 – Error Codes
Error Code    Description
Two flashes    Machine is out of paper or paper does not feed.
Three flashes    Paper jam.
Four flashes    The cartridge is not installed properly.
Five flashes    The cartridge is not installed properly.
Seven flashes    The cartridge is not installed in the correct position.
Eight flashes    Ink absorber is almost full.
Thirteen flashes    The remaining ink level cannot be detected.
Fourteen flashes    The cartridge cannot be recognised.
Fifteen flashes    The cartridge cannot be recognised.
Sixteen flashes    The ink has run out.


Canon IP2870 – Reset Ink Levels on the Cartridges

The Canon IP2870 cannot physically see inside the cartridges to find out how much ink is left. The copper contacts on the outside of the cartridge contain the ink level information. It is not possible to reset the ink levels to full. If you refill your cartridge, the printer will always show an empty cartridge message.

You can override the empty cartridge message by holding down the “stop / reset” button on the printer for around five seconds. The printer should continue printing, and use any of the remaining ink in the cartridge.

If the printer thinks that both cartridges are empty, you will receive a second error message, and you will need to hold the button for another five seconds.

If the circuitry on the cartridges is actually damaged this process will not work.

resetting your monitor resolution settings fedora

So, you have setup dual monitor in your fedora machine, and somehow the resolution seems to be goofed up.

Now, you want to fix it to default / normal.

Use this

$ xrandr -s 0